Guides / Mixing & mastering
Mixing vs mastering: what’s the difference?
By David Ezra, mixing & mastering engineer · 6 min read
It’s the question I get asked most: “Do I need mixing, mastering, or both?” The two words get used as if they mean the same thing, but they’re different jobs that happen at different stages, and your release needs both.
The short answer
Mixing takes all the separate tracks of your song (vocals, drums, bass, synths) and blends them into one balanced stereo track.
Mastering takes that finished stereo mix and gives it the final polish, so it sounds its best and translates on every system and streaming platform.
What happens in mixing
Mixing is where the song’s sound takes shape. I start with your individual tracks (the stems or multitracks) and work on each one, then how they all fit together:
- Balance: setting the level of every part so nothing gets lost and the important parts lead.
- EQ: shaping each sound so it has its own space, e.g. making room for the vocal so it isn’t fighting the guitars.
- Compression: controlling dynamics so vocals sit steady and drums hit with punch.
- Panning and width: placing sounds left to right to build a wide, clear stereo picture.
- Space and depth: reverb and delay to put sounds in a room, near or far.
- Automation: moving levels and effects through the song, so the chorus lifts and the ad-libs pop.
- Character: saturation, analogue warmth and creative effects that give the record its personality.
I mix on an analogue SSL console with outboard gear, which adds the depth and glue that’s hard to get from plugins alone. A great mix is where most of the emotional impact of a record comes from.
What happens in mastering
Mastering starts once the mix is approved. It works on the whole stereo track at once, not on individual instruments. The aim is to take a great mix and make sure it sounds great everywhere: on earbuds, in the car, on a club system and next to other songs on a playlist.
- Tonal balance: subtle EQ so the track isn’t too bright, dull or boomy on different speakers.
- Dynamics and loudness: bringing the track to a competitive level without crushing the life out of it.
- Streaming-ready levels: Spotify, Apple Music and YouTube turn loud tracks down automatically, so a smart master is balanced, not just loud.
- Consistency: on an EP or album, making every song feel like it belongs together in level and tone.
- Final files: clean starts and ends, the right formats, plus versions like a vinyl master or Dolby Atmos.
Side by side
| Mixing | Mastering | |
|---|---|---|
| Starts with | Individual tracks (stems) | One stereo mix |
| Works on | Each instrument and vocal | The whole song at once |
| Main goal | Balance, clarity, emotion | Polish, loudness, translation |
| Can fix | A buried vocal, a muddy bass | Overall tone and level |
| Comes | First | Last, before release |
Do you need both?
If you’re releasing music, yes, almost always.
- Only have rough tracks? You need mixing first, then mastering.
- Already have a finished mix (yours or another engineer’s)? You only need mastering.
- Releasing on streaming platforms? Mastering makes sure your song holds its own next to everything else on a playlist.
The most common mistake is expecting mastering to fix mix problems. If the vocal is too quiet or the low end is muddy, that has to be fixed in the mix. Mastering can only work with the whole stereo file, so it can’t turn up the vocal without turning up everything else.
Should the same engineer do both?
It works well either way. When one engineer handles both, the master follows the same vision as the mix, and if something needs a tweak it can be fixed in the mix instead of patched in the master. A separate mastering engineer brings fresh ears to a mix they haven’t been living with.
That’s why I offer mixing with mastering added as one package: the same ears take your song from raw tracks to a finished, release-ready master.
What to send
For mixing and mastering
Your individual tracks as 24-bit WAV files, all starting from the same point, plus a rough mix and references. There’s a full checklist in How to prepare your stems for mixing.
Ready for a release-ready mix & master?
Build your package in a few clicks: mixing on an analogue SSL console with mastering for streaming, vinyl or Dolby Atmos, delivered as fast as one working day.
See prices & get 20% off Code EZRA20 is applied automaticallyQuestions people ask
Is mastering necessary for Spotify?
Yes. Spotify turns tracks up or down to a similar loudness, so a master isn’t just about being loud. It makes sure your song is balanced, clear and consistent so it holds up next to professionally released music.
Can mastering fix a bad mix?
Only a little. Mastering works on the whole stereo track, so it can improve overall tone and level, but it can’t fix a buried vocal or a muddy bass. Those need to be fixed in the mix.
Which comes first, mixing or mastering?
Mixing always comes first. Once the mix is approved, mastering is the final step before release.
How long do mixing and mastering take?
My standard turnaround is 5–7 working days, with faster options of 2–5 working days or 1 working day if you have a deadline.
Next: How to prepare your stems for mixing →